|
|
|
|
|
|
Squeek No More 1011345 Floor Squeak Repair Screw
|
|
|
Specially scored waxed screws. Scored head breaks off at the same place every time. Carded.
|
|
|
|
|
|
|
|
|
|
QuikDrive PMANDREL75-RC Replacement Mandrel
|
|
|
Keep your Quik Drive auto-feed screw driving system in ideal condition with these Simpson Strong-Tie? replacement parts.
|
|
|
|
|
|
|
|
|
|
Squeek No More 1010543 Floor Squeak Repair Kit
|
|
|
The Squeek No More kit is designed to stop floor squeaks from above the floor by going safely through the carpet. The kit works on all carpets even berber. The Squeek No More kit has 50 screws that are scored one inch from the head and coated with a special wax that allows the screw to safely pass through the carpet. The tooling, a tripod fixture and driver bit, drives the screw safely through the carpet stopping the score on the screw slightly below the wood of the floor. Then with the tripod fixture you snap the head of the screw off. The screw thread then holds the floor to the joist without having any part of the screw sticking up that you could walk on. The kit also includes 2 joist finding tools. You use these to quickly and accurately find the joist from above the floor.
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie WBSK Hardware Kit
|
|
|
The WBSK workbench and shelving hardware kit provides the connectors and connector fasteners to build a workbench or shelving unit. The kit features the Simpson Strong-Tie? Rigid Tie? RTC2Z corner connector that makes it easier to make strong and durable corner connections with 2 x 4 lumber using no angle cuts or bolts. Each kit contains enough RTC2Z connectors to construct one workbench. Two kits are necessary to build a four-shelf unit. With the WBSK kit, a professional quality project can be customized and completed in a couple of hours.
|
|
|
|
|
|
|
|
|
|
2x4basics 90166 Bracket, Resin, Sand
|
|
|
You determine the size. Connect with railing brackets with 2x4 and 2x6 lumber to easily add a bench to any size or shape deck. Gain increased seating area while using only 7 in of deck space. Assembled unit stands 36 in H for deck railing, seat is 17 in H. Quick and easy to assemble using basic tools. Includes bench bracket, hardware and instructions. Lumber not included.
|
|
|
|
|
|
|
|
|
|
BEARING PLATE GALV 1/2X9/64IN - Case of 50
|
|
|
The BPS and LBPS are bearing plates that offer increased flexibility while meeting the latest requirements of the code for 2 x 4 and 2 x 6 walls. The slotted hole allows for adjustability to account for bolts that are not in the middle of the sill plate.
|
|
|
|
|
|
|
|
|
|
BEARING PLATE GALV 5/8X9/64IN - Case of 50
|
|
|
Bearing plates give greater bearing surface than standard-cut washers and help distribute the load at these critical connections.
|
|
|
|
|
|
|
|
|
|
2x4basics 90128 Shelf Link
|
|
|
You can determine the size and configuration, just add 2x4's to the ShelfLinks to make functional and custom shelving in any length, height and configuration. Made of structural resin. Can support spans up to 8 ft. Includes ShelfLinks, hardware and instructions. Lumber not included.
|
|
|
|
|
|
|
|
|
|
Grabber Construction Deckmaster Series DMP100-10 Hidden Bracket, For: 3/4 in Decking Powder Coat Brackets
|
|
|
When using the Grabber Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Grabber Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form around fastener holes.
|
|
|
|
|
|
|
|
|
|
BEARING PLATE ZMAX 1/2X9/64IN - Case of 50
|
|
|
The LBP is designed to provide a greater bearing surface than standard-cut washers and help distribute the load at critical connections. This light bearing plate works by transferring concentrated compressive forces between two structural elements. The LBP features a galvanized finish for extra corrosion-resistance.
|
|
|
|
