|
|
|
|
|
|
Oregon S100U Chainsaw Chain, For: 72 Series Chain Chassis, 3/8 in TPI/Pitch
|
|
|
33SL - Ultra low-kickback chisel chain for both professional and consumer users. Provides high cutting speed from 2.5 to 3-1/2 in. Efficient, smooth cutting. Excellent, stay-sharp. 72SG semi-chisel cutter provides cutting efficiency and performance in dirty or rocky conditions. No interference with chip clearance or flow. Standard 72 Series chain chassis. Reduces kickback and allows 3 to 6 cu-in cutting speed. 3/8 in pitch.
|
|
|
|
|
|
|
|
|
|
Oregon D100U Chainsaw Chain, 100 ft L Bar, 0.05 Gauge, 3/8 in TPI/Pitch
|
|
|
The Oregon D100U AdvanceCut? saw chain reel contains 100 ft of 72 V chain, an ideal choice for occasional and commercial users. The low-vibration full chisel cutters offer top performance while also providing a smooth cutting experience via our patented bent over depth gauge.
|
|
|
|
|
|
|
|
|
|
Oregon H100U Chainsaw Chain, 100 ft L Bar, 0.05 Gauge, 0.325 in TPI/Pitch
|
|
|
The H100U saw chain reel contains 100 ft of ControlCut? chain, an ideal choice for occasional users such as property owners and commercial cutters. The low-vibration, Micro Chisel cutters have small radius working corners for excellent performance and easy maintenance.
|
|
|
|
|
|
|
|
|
|
Oregon 27742 Depth Gauge Tool with Flat File, Steel
|
|
|
Depth gauge setting being a major factor affecting any saw chain's level of safety and performance, this depth gauge filing kit including 0.025 in drop center depth gauge tool and flat file helps the setting easily.
|
|
|
|
|
|
|
|
|
|
Oregon 28840 Sharpening Stone, Vitrified Ceramic
|
|
|
Heavy-duty, long-life stones to fit the Electric Sure Sharp (sku # 623.1112).
|
|
|
|
|
|
|
|
|
|
Oregon 28841 Sharpening Stone, Vitrified Ceramic
|
|
|
Heavy-duty, long-life stones to fit the Electric Sure Sharp (sku # 623.1112).
|
|
|
|
|
|
|
|
|
|
Oregon 28842 Sharpening Stone
|
|
|
Heavy-duty, long-life stones to fit the Electric Sure Sharp (sku # 623.1112).
|
|
|
|
|
|
|
|
|
|
Crescent Nicholson 01974 Chainsaw File, Round
|
|
|
Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between 0.020 to 0.030 in.
|
|
|
|
|
|
|
|
|
|
Crescent Nicholson 01590 Chainsaw File, Round
|
|
|
Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between 0.020 to 0.030 in.
|
|
|
|
|
|
|
|
|
|
Crescent Nicholson 01630 Chainsaw File, Round
|
|
|
Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between 0.020 to 0.030 in.
|
|
|
|
