|
|
|
|
|
|
Oregon 27742 Depth Gauge Tool with Flat File, Steel
|
|
|
Depth gauge setting being a major factor affecting any saw chain's level of safety and performance, this depth gauge filing kit including 0.025 in drop center depth gauge tool and flat file helps the setting easily.
|
|
|
|
|
|
|
|
|
|
Oregon 28840 Sharpening Stone, Vitrified Ceramic
|
|
|
Heavy-duty, long-life stones to fit the Electric Sure Sharp (sku # 623.1112).
|
|
|
|
|
|
|
|
|
|
Oregon 28841 Sharpening Stone, Vitrified Ceramic
|
|
|
Heavy-duty, long-life stones to fit the Electric Sure Sharp (sku # 623.1112).
|
|
|
|
|
|
|
|
|
|
Oregon 28842 Sharpening Stone
|
|
|
Heavy-duty, long-life stones to fit the Electric Sure Sharp (sku # 623.1112).
|
|
|
|
|
|
|
|
|
|
Crescent Nicholson 01974 Chainsaw File, Round
|
|
|
Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between 0.020 to 0.030 in.
|
|
|
|
|
|
|
|
|
|
Crescent Nicholson 01590 Chainsaw File, Round
|
|
|
Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between 0.020 to 0.030 in.
|
|
|
|
|
|
|
|
|
|
Crescent Nicholson 01630 Chainsaw File, Round
|
|
|
Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left hand cutters on one side of chain then move to the other side and file all the right hand cutters. Height between cutting teeth and depth gauge is between 0.020 to 0.030 in.
|
|
|
|
|
|
|
|
|
|
Oregon 26365 Grease Gun, Pre-Loaded, Plastic, For: Chainsaws
|
|
|
Preloaded see-through gun delivers high-quality grease in measured amounts. Prolongs life of bar and cutting chain, improves cutting performance. The simplest, most effective way to grease chainsaw bar nose bearings.
|
|
|
|
|
|
|
|
|
|
Oregon 25892 Chainsaw File Guide, Round, Steel
|
|
|
Assembled 7/32 in file guide including one round file and one wooden handle.
|
|
|
|
|
|
|
|
|
|
Oregon 25894 Chainsaw File Guide, Round, Steel
|
|
|
Assembled 5/32 in file guide including one round file and one wooden handle.
|
|
|
|
